bas19-v-g, bas20-v-g, bas21-v-g document number 83390 rev. 1.0, 23-nov-10 vishay semiconductors www.vishay.com 1 12 3 16923 for technical questions within your regi on, please contact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com small signal switching diodes, high voltage features ? silicon epitaxial planar diode ? fast switching diode in case sot-23, especially suited fo r automatic insertion ? general purpose switching applications ? high conductance ? aec-q101 qualified ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec mechanical data case: sot-23 weight: approx. 8.1 mg packaging codes/options: 18/10k per 13" reel (8 mm tape), 10k/box 08/3k per 7" reel (8 mm tape), 15k/box parts table part type differentiation ordering code marking remarks bas19-v-g v rrm = 120 v bas19-v-g-18 or bas19-v-g-08 a8g tape and reel bas20-v-g v rrm = 200 v bas20-v-g-18 or bas20-v-g-08 a9g tape and reel bas21-v-g v rrm = 250 v bas21-v-g-18 or bas21-v-g-08 aag tape and reel
www.vishay.com 2 document number 83390 rev. 1.0, 23-nov-10 bas19-v-g, bas20-v-g, bas21-v-g vishay semiconductors for technical questions within your r egion, please contact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com absolute maximum ratings t amb = 25 c, unless otherwise specified 1) measured under pulse condi tions; pulse time = t p 0.3 ms 2) device on fiberglass subs trate, see layout on next page thermal characteristics t amb = 25 c, unless otherwise specified 1) device on fiberglass subs trate, see layout on next page electrical characteristics t amb = 25 c, unless otherwise specified parameter test condition part symbol value unit continuous reverse voltage bas19-v-g v r 100 v bas20-v-g v r 150 v bas21-v-g v r 200 v repetitive peak reverse voltage bas19-v-g v rrm 120 v bas20-v-g v rrm 200 v bas21-v-g v rrm 250 v non-repetitive peak forward current t = 1 s i fsm 2.5 a non-repetitive peak forward surge current t = 1 s i fsm 0.5 a maximum average forward rectified current (av. over any 20 ms period) i f(av) 200 1) ma dc forward current i f 200 2) ma repetitive peak forward current i frm 625 ma power dissipation p tot 250 2) mw parameter test condition symbol value unit thermal resistance junction to ambient air r thja 430 1) c junction temperature t j 150 c storage temperature range t stg - 65 to + 150 c parameter test condition symbol min. ty p. max. unit forward voltage i f = 100 ma v f 1.0 v i f = 200 ma v f 1.25 v leakage current v r = v rmax. i r 100 na v r = v rmax. , t j = 150 c i r 100 a dynamic forward resistance i f = 10 ma r f 5 diode capacitance v r = 0, f = 1 mhz c tot 5pf reverse recovery time i f = i r = 30 ma, r l = 100 , i rr = 3 ma t rr 50 ns
bas19-v-g, bas20-v-g, bas21-v-g document number 83390 rev. 1.0, 23-nov-10 vishay semiconductors www.vishay.com 3 for technical questions within your regi on, please contact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com test circuit and waveforms layout for r thja test thickness: fiberglass 1.5 mm (0.059 in.) copper leads 0.3 mm (0.012 in.) test circuit inp u t signal - total p u lse d u r ation tp(tot )=2 s - d u ty f actor = 0.0025 -r ise time of re v erse p u lse t r = 0.6ns -r e v erse p u lse d u r ation t p = 100ns oscilloscope - r ise time t r = 0.35ns - cic u it capitance* c < 1pf * c= oscilloscope inp u t capactitance + par asitic capacitance w a v e fo rm s; i r =3ma input si g nal output si g nal 1 8 09 8 8 (0.03) 5 (0.2) 7.5 (0.3) 3 (0.12) 1 (0.4) 1 (0.4) 2 (0. 8 ) 2 (0. 8 ) 1.5 (0.06) 5.1 (0.2)
www.vishay.com 4 document number 83390 rev. 1.0, 23-nov-10 bas19-v-g, bas20-v-g, bas21-v-g vishay semiconductors for technical questions within your r egion, please contact one of the following: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com package dimensions in millimeters (inches): sot-23 foot print recommendation: rev. 8 - date: 23.sept.2009 17418 document no.: 6.541-5014.01-4 0.9 (0.035) 1 (0.039) 0.9 (0.035) 1 (0.039) 1.43 (0.056) 0.45 (0.018) 0.35 (0.014) 2.8 (0.110) 3.1 (0.122) 0.45 (0.018) 0.35 (0.014) 0.45 (0.018) 0.35 (0.014) 0.1 (0.004) max. 2.35 (0.093) 2.6 (0.102) 0.175 (0.007) 0.098 (0.004) 1.15 (0.045) 0.9 (0.035) 1.20 (0.047) 0.95 (0.037) 0.95 (0.037) 2 (0.079) 0.7 (0.028) 0.9 (0.035) 0 to 8 0.2 (0.008) 0.3 (0.012) 0.5 (0.020) 0.550 ref. (0.022 ref.)
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
